Standard Speed Floor Buffer / Scrubbers - 175 rpm
Floor buffers - Floor machines and supplies
*1.5 HORSE POWER
( BASIC'S BEST BUY MACHINE )
INCLUDES PAD HOLDER AND IS 1.5 Hp !
No job is too tough for this rugged series of floor machines / buffers from EDIC. With its all-metal construction and steel planetary gear boxes, the Saturn can stand up to the heaviest workloads, yet the ride is surprisingly smooth and quiet. The low speed models are built specifically to handle the stress associated with stripping and scrubbing hard floor surfaces as well as bonnet cleaning and shampooing carpets. Features like the quick and easy handle adjustment, anti-fatigue design, and the exclusive “lockout lever” for safe two-handed start up make this machine operator friendly and a winner in every commercial setting. Available in six different models, there is a perfect low speed Saturn for any size job.
About Floor Care
APPLYING FLOOR FINISH: THEIR ARE MANY DIFFERENT WAYS TO APPLY FINISH. MOPS, LAMBS WOOL APPLICATORS AND SPONGE MOPS ARE THE MOST COMMONLY USED APPLICATIONS MOPS BEING THE PREFERRED METHOD. WHEN USING A MOP YOU WANT TO USE A FINISH MOP OR RAYON MOP BECAUSE THESE MOPS TEND NOT TO LINT. THEIR IS NOTHING WORSE THAN GETTING THROUGH A JOB AND SEEING LINT RUNNING THROUGH THE FINISH. YOU WANT TO PUT THE FINISH IN A MOP BUCKET. LINE THE BUCKET WITH A TRASH LINER AS NOT TO CONTAMINATE THE FINISH AND MAKE CLEAN UP EASIER. DO NOT USE A USED MOP TO APPLY FINISH. MOP ON FLOOR FINISH IN THIN COATS STARTING FROM THE FARTHEST AREA. SEALER GENERALLY ISN'T NEEDED WITH NEWER FORMULATED FINISHES. APPLY 4 TO 5 THIN COATS ALLOWING 20 TO 30 MINUTES BETWEEN COATS. AFTER THE FIRST COAT YOU CAN BURNISH THE FLOOR FINISH WHICH WILL CUT OFF MICROSCOPIC PEAKS IN THE FIRST COAT OF FINISH BUT THIS IS NOT NECESSARY. IF YOU APPLIED THE STRIPPED THE FLOOR AND APPLIED THE FINISH CORRECTLY THE FLOOR SHOULD DRY TO A DEEP GLOSS UNLESS THE FINISH YOU USED HAS A SATIN FINISH.
HOME FLOOR BUFFERS
Floor buffers, machines and supplies